3D PRINTED HOLLOW FORM OBJECT: THE HYBRID

 First I had to make at least six concepts that's either hollow or self-supporting or both. And then I had to combine one of them with those with my partners for the final project.

I like this one. I used this model as a way to learn how to use the boolean tools, kinda neat and handy tool.

Probably my worse one. But it was also my first model (I don't know why I uploaded this second). This model was a way for me to learn twisting and tapering.

It's an ice-cream cone. I made this because I was in a mood for ice-cream. I wasn't sure if I should have made the spheres like we did in class before or I should have used the actual sphere object tool to make a perfect round sphere. My thoughts was if I had to 3D print this, the flat-ish top would have been able to support the printing, hopefully.

Did a spiral staircase. I like this the most. Learning how to make a spiral upward was pretty neat.

I made an emphasis on the twist deform tool on this model. This is my second favorite, thought it was pretty cool.

My last object was a house with a chimney. This was also the model that I would be using to incorporate it with my collaboration with my two partners, Bin and Zoey.

The idea here was at first we thought about doing a tree house motif, but it didn't play out because when uploading it on the 3D printing software there were errors, because we initially had the house on top of Zoey's large twisted model. Bin wanted to use his curved star model and decided to attached as the chimney. With the final concept the 3D printing software didn't show any problems, as far as I could see. 

Thank you,

Goodbye~

PAPERCRAFT OBJECTS: FINAL REVISION

So I finished this the week before and did my revision based on the critiques from my classmates. Thus there's not much change from before aside from me recently got a hot glue gun for the adhesive, but it was still difficult to glue the tiny parts, tape remains to be one of the better methods to keep this project together. Here are some pictures again below. 

Full warning, there is (Nendoroid) doll nudity down below:

I intended to use those gift tissue paper, I thought I had some at home but it seems I was mistaken and used them all up prior. I made do with rice paper, because it has that translucent look. 

As you can see the shower head is detachable.

Nendoroid Doll nudity starts here:

I used blu tack for Super Sonico to hold the shower head.

That's all
Thank you

Goodbye~

PAPERCRAFT OBJECTS: Continue

 Today is going to be a much shorter blog than usual. I reworked my shower from last time.

I've now added a curtain rod and some shampoo bottles. The changes I made compared to last time was the shower head is now a bit smaller and not as bulky.

The Shampoo bottles looks like the bare amount of work went into them, yes, but I can't help it. I wanted to do the ones where it has those lotion pumps, however when crafting it in real life, they were just too small to do.

That's all

Goodbye~